2015：Current is still flowing, the relay may not be switched off
電流仍在流動，繼電器可能無法關閉。

The active mains rectifier unit tried to separate the device from the mains; thereby still a peak current of greater than 10 A was detected. 有源市電整流器單元試圖將設備與市電分離；從而仍然檢測到大于10A的峰值電流。

This error cannot be reset.
無法重置此錯誤。
The device must be restarted.
必須重新啟動設備。

Possible causes:
可能的原因：
The DC link is still loaded although the "ready-for-use"-signal on the signal bus and the signal "control ready-for-use" have dropped.盡管信號總線上的“可供使用”信號和“可供控制”信號已下降，但直流鏈路仍處于加載狀態。

Baumuller鮑米勒驅動器BM4-03維修，
Baumuller 包米勒驅動器BUG623-56-54-E-013，
印刷設備常用 包米勒驅動器BM4-03，
Baumuller驅動器BUS622-15/22-54-M-202能測試維修
Bau+A41.0121L BM4434 BM4433 BM4432，
Baumuller鮑米勒驅動器BM4443-SI1-01200-03 可測試維修，
電腦橫切機專用 鮑米勒驅動器BM4444-SI0-01243-03 可測試維修，
Baumuller選件卡 BM4-O-PLC-01-01-02-10-001，
報業印刷專用包米勒伺服驅動器BUS624+B42-38/55-54-M-003 BUS624，
Baumuller包米勒驅動器B+A35:B70-1 BM4462，